Moeller SmartWire SWIRE-GW-DP, Hardware, Engineering And Function Description, Page: 24 / 49

Commissioning
20
11/06 AWB1251-1590GB
there are any divergences they are indicated by a slowly
flashing SmartWire LED (
a section “Diagnostic data”,
page 26).
X
Switch in the PROFIBUS-DP fieldbus.
As soon as the gateway is integrated into the PROFIBUS-
DP network the BUS LED will light up permanently.
X
Switch in the PROFIBUS-DP master. to “run”.
The Ready LED on the PROFIBUS-DP gateway switches
from flashing to permanently ON.
Meaning of the status
LEDs The gateway SWIRE-GW-DP features four green status LEDs.
Ready-LED
U-Aux-LED
h
Valid data will only be sent via the PROFIBUS-DP to the
gateway once the PROFIBUS LED stays permanently ON.
a Continuous
light Supply voltage available
b OFF No supply voltage available for the
gateway and the SmartWire or internal
fault in the gateway
c Fast flashing New configuration has been activated
via the configuration button
d Slow flashing PROFIBUS-DP master im STOP mode
d
c
b
a
a Continuous
light Supply voltage available for the
contactor coils
b OFF No supply voltage available
b
a