14
To connect to the Molex, a plug housing is required (available separately).
M-S Part No
Description
Image
24200-03
Molex terminal housing
Termination pins are required to be crimped to the end of the required cable. The pin input and
maximum output will require a cable size of 0.75-1 mm².
M-S Part No
Description
Image
24210-03
Molex terminal 0.75-1 mm2, 20 pcs
24215-03
Molex terminal 0.75-1 mm2, 3000 pcs
Additional part numbers for connecting to the Molex are as below:
M-S Part No
Description
Image
24290-03
Molex crimping tool 0.75-1 mm²
24295-03
Molex terminal extraction tool
Molex crimping information can be found at:
https://www.molex.com/pdm_docs/ats/ATS-6382754HM.pdf
Molex terminal extraction tool information can be found on page 3 at:
https://www.molex.com/pdm_docs/ats/ATS-011030016-001.pdf
