18
8.
Switch panel (load area)
Building up the switch panel
•
Remove the required switch icon from the sheet and place
it squarely in the required position on the required switch.
•
Repeat this process for the remaining five switches (or the
required number).
•
Remove the protection tape from the switch overlay,
place the membrane cover over the icons and secure
firmly.
First time configuration of the switch panel
•
Insert the batteries to the battery slots to make the switch panel detectable.
•
The switch panel will then enter its ‘discoverable’ configuration mode (the LED will flash the
LED indicator red and green in an alternating fashion) and the switch panel can now be set
up for its function via the phone APP.
•
Search for the switch panel in the APP, alternatively scan the data matrix code supplied with
the switch.
•
Follow the APP instructions.
•
Continue until all the switch panels are programmed. The switches can then be clipped back
onto their backing plates.
