background image

Modine Manufacturing Company has a continuous product improvement program; it reserves the right to change design and specifications without notice.

Commercial Products Group

Modine Manufacturing Company

1500 DeKoven Avenue

Racine, WI 53403 

Phone: 1.800.828.4328 (HEAT) 

www.modinehvac.com

© Modine Manufacturing Company 2013

COMMERCIAL WARRANTY

Seller warrants its products to be free from defects in material and 

workmanship, EXCLUSIVE, HOWEVER, of failures attributable to the use  

of materials substituted under emergency conditions for materials normally 

employed. This warranty covers replacement of any parts furnished from the 

factory of Seller, but does not cover labor of any kind and materials not 

furnished by Seller, or any charges for any such labor or materials, whether 

such labor, materials or charges thereon are due to replacement of parts, 

adjustments, repairs, or any other work done. This warranty does not apply to 

any equipment which shall have been repaired or altered outside the factory of 

Seller in any way so as, in the judgment of Seller, to affect its stability, nor which 

has been subjected to misuse, negligence, or operating conditions in excess of 

those for which such equipment was designed. This warranty does not cover 

the effects of physical or chemical properties of water or steam or other liquids 

or gases used in the equipment. 
BUYER AGREES THAT SELLER’S WARRANTY OF ITS PRODUCTS TO  

BE FREE FROM DEFECT IN MATERIAL AND WORKMANSHIP, AS LIMITED 

HEREIN, SHALL BE IN LIEU OF AND EXCLUSIVE OF ALL OTHER 

WARRANTIES, EITHER EXPRESS OR IMPLIED, WHETHER ARISING  

FROM LAW, COURSE OF DEALING, USAGE OF TRADE, OR OTHERWISE, 

THERE ARE NO OTHER WARRANTIES, INCLUDING WARRANTY OF 

MERCHANTABILITY OR FITNESS FOR PURPOSE, WHICH EXTEND 

BEYOND THE PRODUCT DESCRIPTION CONFIRMED BY BUYER AND 

SELLER AS OF THE DATE OF FINAL AGREEMENT.
This warranty is void if the input to the product exceeds the rated input as 

indicated on the product serial plate by more than 5% on gas-fired and oil-fired 

units, or if the product in the judgment of SELLER has been installed in a 

corrosive atmosphere, or subjected to corrosive fluids or gases, been subjected 

to misuse, negligence, accident, excessive thermal shock, excessive humidity, 

physical damage, impact, abrasion, unauthorized alterations, or operation 

contrary to SELLER’S printed instructions, or if the serial number has been 

altered, defaced or removed.
BUYER’S REMEDY FOR BREACH OF WARRANTY, EXCLUSIVE OF ALL 

OTHER REMEDIES PROVIDED BY LAW, IS LIMITED TO REPAIR OR 

REPLACEMENT AT THE FACTORY OF SELLER, ANY COMPONENT WHICH 

SHALL, WITHIN THE APPLICABLE WARRANTY PERIOD DEFINED HEREIN 

AND UPON PRIOR WRITTEN APPROVAL, BE RETURNED TO SELLER WITH 

TRANSPORTATION CHARGES PREPAID AND WHICH THE EXAMINATION 

OF SELLER SHALL DISCLOSE TO HAVE BEEN DEFECTIVE; EXCEPT THAT  

WHEN THE PRODUCT IS TO BE USED BY BUYER AS A COMPONENT PART 

OF EQUIPMENT MANUFACTURED BY BUYER, BUYER’S REMEDY FOR 

BREACH, AS LIMITED HEREIN, SHALL BE LIMITED TO ONE YEAR FROM 

DATE OF SHIPMENT FROM SELLER. FOR GAS-FIRED PRODUCTS 

INSTALLED IN HIGH HUMIDITY APPLICATIONS AND UTILIZING STAINLESS 

STEEL HEAT EXCHANGERS, BUYER’S REMEDY FOR BREACH, AS 

LIMITED HEREIN, SHALL BE LIMITED TO TEN YEARS FROM DATE OF 

SHIPMENT FROM SELLER.
These warranties are issued only to the original owner-user and cannot be 

transferred or assigned. No provision is made in these warranties for any  

labor allowance or field labor participation. Seller will not honor any expenses 

incurred in its behalf with regard to repairs to any of Seller’s products. No  

credit shall be issued for any defective part returned without proper written 

authorization (including, but not limited to, model number, serial number, date  

of failure, etc.) and freight prepaid. 

 

OPTIONAL SUPPLEMENTAL WARRANTY

Provided a supplemental warranty has been purchased, Seller extends the 

warranty herein for an additional four (4) years on certain compressors. 

Provided a supplemental warranty has been purchased, Seller extends the 

warranty herein for an additional four (4) years or nine (9) years on certain  

heat exchangers.
EXCLUSION OF CONSUMABLES & CONDITIONS BEYOND  

SELLER’S CONTROL

The above referenced warranty shall not be applicable to any of the following 

items: refrigerant gas, belts, filters, fuses and other items consumed or worn out  

by normal wear and tear or conditions beyond Seller’s control, including (without 

limitation as to generality) polluted or contaminated or foreign matter contained 

in the air or water utilized for heat exchanger (condenser) cooling or if the failure 

of the part is caused by improper air or water supply, or improper or incorrect 

sizing of power supply.

Component
Applicable Models

“APPLICABLE WARRANTY PERIOD”

Heat Exchangers 

Gas-Fired Units except PSH/BSH

Heat Exchangers

Low Intensity Infrared Units
Compressors

Condensing Units for Cassettes

Burners

Low Intensity Infrared Units
Other

Components excluding Heat Exchangers,  

Coils, Condensers, Burners, Sheet Metal

Heat Exchangers/Coils 

Indoor and Outdoor Duct Furnaces and  

System Units, PSH/BSH, Steam/Hot Water Units, 

Oil-Fired Units, Electric Units, Cassettes,  

Vertical Unit Ventilators
Compressors

Vertical Unit Ventilators
Burners

High Intensity Infrared Units
Sheet Metal Parts

All Products

TEN YEARS FROM DATE OF FIRST BENEFICIAL USE BY BUYER OR ANY OTHER USER, WITHIN 

TEN YEARS FROM DATE OF RESALE BY BUYER OR ANY OTHER USER, WITHIN TEN YEARS 

FROM DATE OF RESALE BY BUYER IN ANY UNCHANGED CONDITION, OR WITHIN ONE 

HUNDRED TWENTY-SIX MONTHS FROM DATE OF SHIPMENT FROM SELLER, WHICHEVER 

OCCURS FIRST

FIVE YEARS FROM DATE OF FIRST BENEFICIAL USE BY BUYER OR ANY OTHER USER, WITHIN 

FIVE YEARS FROM DATE OF RESALE BY BUYER OR ANY OTHER USER, WITHIN FIVE YEARS 

FROM DATE OF RESALE BY BUYER IN ANY UNCHANGED CONDITION, OR WITHIN SIXTY-SIX 

MONTHS FROM DATE OF SHIPMENT FROM SELLER, WHICHEVER OCCURS FIRST

TWO YEARS FROM DATE OF FIRST BENEFICIAL USE BY BUYER OR ANY OTHER USER, WITHIN 

TWO YEARS FROM DATE OF RESALE BY BUYER IN ANY UNCHANGED CONDITION, OR WITHIN 

THIRTY MONTHS FROM DATE OF SHIPMENT FROM SELLER, WHICHEVER OCCURS FIRST

ONE YEAR FROM DATE OF FIRST BENEFICIAL USE BY BUYER OR ANY OTHER USER, WITHIN  

ONE YEAR FROM DATE OF RESALE BY BUYER IN ANY UNCHANGED CONDITION, OR WITHIN 

EIGHTEEN MONTHS FROM DATE OF SHIPMENT FROM SELLER, WHICHEVER OCCURS FIRST

Summary of Contents for PTE













Reviews: