Model Shipways Bluenose Instruction Manual Download Page 2

By the early 1900s, the fishing schooner had developed
into a fast, efficient vessel. American and Canadian
schooners were similar in design. Both operated on the
Grand Banks off Nova Scotia. They carried 10 or more
small dories from which two-man crews fished.

In the days before refrigeration, fishing schooners had to
be fast, or their catch would spoil before it reached market.
Grand Banks’ schooners were divided into two classes:
those carrying ice as a preservative and staying out two or
three weeks, and the salt bankers that fished until their
hulls were full. The latter made two or three trips a season
and were hauled out in winter.

In the United States, most schooners’ home port was
Gloucester, Massachusetts. These became known as
Gloucester fishermen, or just Gloucestermen. In Canada,
the boats hailed from Nova Scotia.

The Canadian fishing schooner 

Bluenose 

was designed by

William J. Roué and built in 1920-1921 at the Smith and
Rhuland Shipyard in Lunenburg, Nova Scotia. Launched
26 March 1921, she was 143 feet long, 112 feet at the
waterline, with a beam of 27 feet, and displacement
around 280 tons. She was a salt banker, carrying salt in
her bins rather than ice.

Bluenose

is famous for beating Gloucestermen in the

International Fishing Schooner Races. She was twice
crowned queen of the Lunenburg fleet, and retains the
record of fastest fishing schooner in Canadian history. 

Skippers had raced each other for years, but the friendly
rivalry took on its international flavor in 1920. H. W.
Dennis of the 

Halifax Herald

and 

Halifax Evening Mail

offered a $4,000 prize and the Dennis Cup to the schooner
winning a series of 40-mile races. His motive was to pre-
serve the fishing schooner while stimulating development
of faster designs.

The first regatta was won by the Gloucesterman 

Esperanto

over the Canadian 

Delawanna

. Seeking retribution, Captain

Angus Walters formed a Canadian syndicate to recapture
the Dennis Cup. This produced 

Bluenose

. In 1921, she out-

sailed 

Elsie

, and the following year she bested 

Henry Ford

.

During the 1923 regatta, Captain Walters protested that

Columbia

crossed the line ahead of the starting gun. When

race officials failed to resolve the issue, Walters became
angry and sailed back to Halifax. He returned in 1930 to
compete for the Thomas Lipton International Trophy, but
lost to 

Gertrude L. Thebaud

. In 1931, 

Bluenos

e beat 

Thebaud

for the Dennis Cup. No more international regattas were
held until 1938, and that was the last one. 

Bluenose

retained

her supremacy over 

Thebaud

and kept the Dennis Cup in

Canada forever.

Bluenose

was sold in 1942 to carry freight in the West

Indies. She sank four years later off Haiti. 

In 1955, Captain Walters and the 

Bluenose 

were inducted

into the Canadian Sports Hall of Fame.

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for Bluenose













































Reviews: