38
RIBS:
Once all the various
Rib
parts are removed from the carrier sheets; very carefully sand using a
flat sanding board all the perimeters to remove any tab connections and some of the laser cutting char.
Start with
Rib WR1
and work through to
WR5
adding the
Rib Caps
(
1/32” x 3/32” x 12”) starting first
with the bottom edge of the ribs and glue the
Cap Strips
in place centered on the
Rib
and hold in place
using small alligator clips with 1/4” of the
Cap Strip
extending beyond the rear of the
Ribs
as seen in
the pictures below.
