background image

10

11

Assembly

Troubleshooting 

Please see the Troubleshooting section in Appendix A of this manual.

Connecting Hardware

The Craft has three external connections: USB, Line out and Headphones out.

USB

USB Mini B Connection for power, MIDI input and MIDI output.  

Simply connect CRAFTsynth to a powered USB socket, such as on your computer, or a 
powered hub with a standard USB mini cable.  

To use MIDI, connect to your computer or tablet with a USB Mini cable and find ‘Craft Synth’ 
listed as a MIDI port on your computer.  

Line Output

Line level output on 3.5mm Stereo jack.
 
This output can be connected to any line level input for monitoring and recording.  
The line output is higher quality than the headphone output, so always use it when recording 
or performing. 

Note: In order to preserve maximum dynamic range, and therefore get the best sound quality, 
there is no line output volume control on the unit. Control the volume using your interface, 
mixer or amplifier. 

Headphones Output

Headphone output on 3.5mm jack.  

The volume can be adjusted using the VOL function (see the Getting Started section), the 
CRAFTsynth app, or through MDI CC (See the MIDI section).

1

2

3

4

5

6

7

8

1x

8x

3x

1x

1x

1x

2x

Summary of Contents for craftsynth






















Reviews: