130
/160
S15 Camera Manual: Operating the Camera
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
3.4.3 Special S15 Configuration in the Browser
The MOBOTIX S15M and S15D with one or two D11/N11 sensor modules offer a range
of special configuration options for the image settings due to their hemispheric lenses.
Depending on where the camera is mounted (ceiling, wall or floor) and on the live image
display preferred by the user, certain important basic settings and, if necessary, their
adjustment must be configured when a S15 is first installed.
A corresponding adjustment of the image setting is strongly recommended if one or both of
the sensor modules of a S15D were mounted using a 15° wedge (available as an accessory).
S15D and Different Sensor Modules
A range of combination options are pro-
vided that change the available display
modes and configuration possibilities by
using the MOBOTIX S15D with different
sensor modules.
Because of this, a S15D automatically
detects which sensor modules are
installed and proceeds as follows:
• When the camera is started for the first time, it detects the connected sensor modules
and captures their data (focal length, day or night version).
• If only one sensor module is connected, the camera acts as a single-lens camera
(meaning that there is no automatic day/night switching, etc.).
• If there is no change within the first 12 hours of operation, the camera writes the
details of these sensor modules to the camera configuration.
• With every restart, the camera checks if the stored sensor modules are present. If
any changes are detected,
the camera indicates these through a corresponding
alert in the live display
.
Configuring the LEDs on an S15D
Because the LEDs on a S15D are located not only on
the camera but also on the sensor modules, they can
be configured separately for the camera and each
sensor module (
Admin Menu > LED Setup
).
