Mobotix MX-Q26B-6D016, Manual, Page: 84 / 148

84
Q26 Camera Manual: Installation
2.4.2 Procedure
1. Prepare the network connection : Run the network cable above the suspended ceiling
and ensure that enough cable slack is available.
2. Cut a hole for installation : Cut a round hole for camera
installation (e.g. with a 150 mm hole saw). Use the sup-
plied cutting template of the In-Ceiling Set (available for
downloading from
www.mobotix.com
).
3.
Remove the outer shell
: Remove all four Allen screws
using the supplied Allen wrench and lift off the outer shell.
4.
Remove the mounting ring
: Separate the mounting ring
from the camera housing. This ring is not required when
mounting the camera in the In-Ceiling Set.
5. Place the camera in the In-Ceiling Set : The dovetail guides
at the back of the camera housing fit exactly into the
openings of the In-Ceiling mounting ring.
6.
Connect the cable
: Connect the on-site network cable to
the camera network cable using a standard connector.