Mobotix MX-Q26B-6D016, Manual, Page: 50 / 148

50
Q26 Camera Manual: Product Overview
1.4.15 MX-GPS-Box
Order no.: MX-OPT-GPS1-EXT
The MX-GPS-Box primarily serves as a high-precision time
source for systems without an Internet connection. In addi-
tion, it can provide triggering based on GPS events (reach-
ing or moving away from a specified position; exceeding or
not reaching a specified speed). This interface box can be
attached to all MOBOTIX cameras with an MxBus interface.
The MX-GPS-Box is equipped with the same compact housing as the other interface boxes
(protection class IP65, –30 to 60 °C/–22 to 140 °F). This interface box should not be installed
inside of other wall mounts, but on the exterior of the building with a large section of open
sky above it. This ensures the best possible reception from GPS satellites and thereby the
highest possible accuracy of the received GPS data. The maximum length of the MxBus
wiring (0.8 mm diameter wires) is 50 m/55 yd.
1.4.16 MX-232-IO-Box
Order no.: MX-OPT-RS1-EXT
This box provides the signal inputs and outputs as well as
the RS232 (serial) interface. It replaces the connections
that were handled on the older camera models via a D-Sub
15-HD connector. The MX-232-IO-Box (protection class IP65,
–30 to 60 °C/–22 to 140 °F) can be attached to all MOBOTIX
cameras with an MxBus or USB interface. The maximum
length of the MxBus wiring (0.8 mm diameter wires) is 50 m/55 yd. If the MiniUSB connector
is used, the maximum cable length is 5 m/16 ft.
1.4.17 ExtIO Expansion Module
Order no.: MX-ExtIO
The device, which is suitable both for on-wall and in-wall
installations, contains a powerful speaker, microphone, infra-
red motion sensor, ambient temperature sensor, two input
and two output contacts and two illuminated keys. It is ideal
for door communication, elevators, access control systems,
etc. The ExtIO is suitable for use as direct connection to the
S15 via a MiniUSB cable (max. 5 m), which can be ordered
separately, or as a network connection via the PoE switch.