Mobotix MX-Q26B-6D016, Manual, Page: 104 / 148

104
Q26 Camera Manual: Installation
2.9.6 Connecting a USB Cable
Using the USB plug (red circle in figure), you can attach
existing expansion modules, such as the MOBOTIX ExtIO
(USB), the MX-232-IO-Box or external USB hard drives to
the camera in a weatherproof and well-protected manner.
Procedure
1. In case the camera had already been installed, remove
the camera so you can access the connectors on the
back.
2. Remove bayonet catch and USB plug : Turn the bay-
onet catch to the left (red arrow in figure), take it off
and remove the blue USB plug.
3. Connect USB cable : Push the MOBOTIX cable with
the angled MiniUSB plug into the connector (red
circle in figure).
4. Attach bayonet catch : Attach bayonet catch and turn
it clockwise until it gently snaps shut (see figure).
Only use USB cables with
angled plugs inside the
housing of the Q26!