Mobotix MX-Q26B-6D016, Manual, Page: 134 / 148

134
Q26 Camera Manual: Operating the Camera
3.4.3 Activating MicroSD Card Recording
Follow these steps to activate the recording to a MicroSD card that has already been MxFFS-
formatted (
Admin Menu > Storage on External File Server / Flash Device):
1. Make sure that there is a MicroSD card in the card slot of the MOBOTIX camera.
2. Make sure that the MicroSD card is formatted in MxFFS format.
3. Activate the SD Flash Card option.
4. Click on Set and then Close to store the configuration.
5. Reboot the MOBOTIX camera ( Admin Menu > Reboot Camera).
Once the camera has rebooted, make sure that the camera displays the FR REC symbols
in its live image. If this is the case, the camera uses the MicroSD card as recording target. If
not, you must activate the recording (see below).
Activating The Recording
If the
FR REC
symbols are not visible in the live image after rebooting, you need to activate
the recording using one of the following methods in the web browser:
• Automatic activation by clicking on the Arm & Record softbutton. Confirm this in the
Easy Dialog by clicking on the
Yes button.
• Manual activation via the Quick Control Recording > Recording on or in Setup Menu >
Recording.
Encryption And Authentication
All video data stored on the MicroSD card is encrypted to ensure security at all times. The
password for this is defined during the card’s formatting procedure and needs to be entered
for authentication whenever the recordings are accessed (see next section).
Activate recording: Admin
Menu >
Storage on External File
Server / Flash Device