73
/128
Mounting the Camera with Pole Mount (Accessory)
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
6.
Attach the camera:
Place the wall mount over the
predrilled positions in the pole mount and tighten
it using the supplied M6x25 mm screws (item 2.2),
washers (item 2.4) and M6 hex nuts (item 2.5). Place
the white caps on the screw heads. Then position
the camera as described in
7.
Clean the lens cover:
Once you have removed the
white protective foil fixed to the front of the lens cover,
clean the cover that has already been screwed on
with a clean soft cotton cloth for optimal image results.
The cover does not have to be removed.
8.
Establish a connection to the camera, check the image:
Establish a connection to the
Section 3.1, «Manual and Automatic Operation – Overview»
and the following sections. The live image from the camera should be visible on the
computer monitor. Check the image section on the computer monitor.
Note
Make sure that you always use the
VarioFlex mount
with
wall adapter
when
install-
ing to poles
. Der VarioFlex Ceiling Mount is
not
to be used.
Screw caps for fas-
tening screws
