64
/128
M25 Camera Manual: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
5.
Attach the camera:
Place the wall mount over the
drill holes and hold it against the wall. Then use the
four screws each with a washer and tighten them
using the appropriate wrench. Do not overtighten
the screws as this may damage the plastic mount.
Check that the screws are securely in place and
place the white caps on the screw heads. Then
position the camera as described in
6.
Clean the lens cover:
Once you have removed
the white protective foil fixed to the front of the
lens cover, clean the cover that has already been
screwed on with a clean soft cotton cloth for opti-
mal image results. The cover does not have to be
removed.
7.
Establish a connection to the camera, check the
image:
Establish a connection to the camera as described in
and Automatic Operation – Overview» and the following sections. The live image
from the camera should be visible on the computer monitor. Check the image sec-
tion on the computer monitor.
Note
Make sure that you always use the
VarioFlex Mount
with
ceiling adapter
when
installing to ceilings
(see
Section 2.3, «Mounting the Camera with Ceiling Mount»).
Screw caps for fas-
tening screws
