68
/128
M25 Camera Manual: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
5.
Connect the cable:
Connect camera patch cable via connector. Make sure that the
cable is not bent or squashed.
6.
Attach the camera:
Place the ceiling mount over
the drill holes, use the four screws each with a
washer and tighten them using the appropriate
wrench. Do not overtighten the screws as this may
damage the plastic mount. Check that the screws
are securely in place and place the white caps
on the screw heads. Then position the camera as
described in
7.
Clean the lens cover:
Once you have removed
the white protective foil fixed to the front of the
lens cover, clean the cover that has already been
screwed on with a clean soft cotton cloth for opti-
mal image results. The cover does not have to
be removed.
8.
Establish a connection to the camera, check the image:
Establish a connection to the
camera as described in
Section 3.1, «Manual and Automatic Operation – Overview»
and the following sections. The live image from the camera should be visible on the
computer monitor. Check the image section on the computer monitor.
Note
Make sure that you always use the
VarioFlex mount
with
wall adapter
when
installing
to walls
Section 2.2, «Mounting the Camera with Wall Mount»).
Screw caps for fas-
tening screws
