Mobius M9 SORTER, User Manual, Page: 28 / 30

MOBIUS CONVEYOR USER GUIDE
28
© 2 0 2 1 E T E R O S T E C H N O L O G I E S I N C . A L L R I G H T S R E S E R V E D . | M O B I U S T R I M M E R . C O M
CLEANING THE CONVEYORS
PREVENTATIVE MAINTENANCE
Eteros recommends removing the side panels and belt to clean the machine daily as outlined in the
CLEANING THE CONVEYORS section of this user guide. The side panels are designed to prevent plant
matter from accumulating in unwanted areas if installed correctly, but some material may still enter
these areas. Regularly inspect the machine to ensure unintended dirt buildup is not occurring.
Eteros conveyors are washdown rated and feature easily-removable conveyor belts. To clean the
conveyor, proceed as follows:
1. Flip the power switch to the OFF position and disconnect the power cord.
2. Remove the hopper.
3. Remove the belt from the body of the conveyor.
4. Spray down or soak the belt in diluted degreaser for 5 - 10 minutes. If necessary, use a cloth or
soft-bristled brush to remove stubborn soils. Rinse thoroughly (pressure washer ok) with warm or
hot water (maximum 55oC/130oF) and allow to dry. Apply a sanitizer if necessary as part of your
sanitation SOP.
5. Spritz metal body and frame with degreaser, allowing time for the degreaser to sit on surfaces and
penetrate any soils. Use a cloth to remove any stubborn soils. Rinse thoroughly (pressure washer ok)
with warm or hot water (maximum 55oC/130oF) and allow to dry. Take care to wash the underside
of the conveyor where internal components are housed.
6. Do not pressure wash the CONTROL BOX. Use a damp cloth with warm water to remove any residue
or buildup on the buttons and dial.
7. Reinstall the belt and hopper on to the machine.