Mobius M9 SORTER, User Manual, Page: 23 / 30

23
© 2 0 2 1 E T E R O S T E C H N O L O G I E S I N C . A L L R I G H T S R E S E R V E D . | M O B I U S T R I M M E R . C O M
8. With the plate removed, separate the side arm with the problematic bearing. Remove the bearing,
and install your new bearing in the bore. Then, reinstall the plate you removed in the previous step.
NOTE: if the problematic bearing is in the arm on the right (pictured below), there are two additional
screws that need to be removed.
9. Slide the tensioning assembly back into the conveyor body, and secure it with the 2 screws that
were removed earlier.
10. Reinstall the belt and side panels.