Technical Installation Guide (4G) v1.9
www.mobileye.com
20
Mobileye 8 Connect
The following paragraphs present the function of each cable and guide you through the
actual connection procedures with the vehicle’s signals.
1.
Identify the wires in the vehicle that carry the required electrical signals
(according to the table above).
2.
After identifying the required signal's locations in the vehicle, pass the Mobileye
8 Connect cable (CAB000400) behind the vehicle trimmings so that it reaches
all vehicle signals (it is recommended that you hang the Mobileye 8 Connect
main unit on the rear-view mirror or place it on the dashboard before passing the
cable behind the vehicle trimmings).
3.
Firmly connect the appropriate wire from the Mobileye 8 Connect signals cable
(CAB000371) to the identified vehicle signal.
4.
Each wire in the Mobileye 8 Connect signals cable (CAB000371) mentioned
above has a unique color. Make sure to connect the correct vehicle signal to its
appropriate wire according to the table in page 12.
5.
Keep the Mobileye 8 Connect EyeCAN connector & EyeWatch connectors easily
accessible.
Attaching the camera unit to the windshield should take place only after receiving a live
streaming video during calibration process.
Connect each power source lead to its appropriate connection in the vehicle.
Make sure the 2A fuses are kept easily accessible
Wires colors are not guaranteed. Always double-check wires’ labels
Always check the Mobileye vehicle database for CAN-bus availability before installation is
started