Technical Installation Guide (4G) v1.9
www.mobileye.com
17
Mobileye 8 Connect
6.
Connection Description
6.1 Site preparation
Make sure the vehicle is parked on a flat surface (no slope).
Check vehicle speed signal availability (either by CAN-bus or by Analog) to
determine which type of installation will be for the Master camera (CAN,
Analog, Mix).
6.2 Vehicle signals connections
Please ensure to identify the Mobileye 8 Connect cables according to table below.
Identified vehicle’s signals
Wires label
Wires color
Vehicle battery (Constant 12V~24V) via 2A fuse
BAT+
Red
Ignition (12V~24V) via 2A fuse
Ignition
Blue
Vehicle GND
GND
Black
CAN B High
CAN Reader
White
CAN B Low
CAN Reader
Yellow
Identifying the vehicle’s electrical signals requires having the keys in the ignition in the ACC
(Accessory) position or ignition ON. Make sure the car headlights and/or any other power
consuming devices/applications, e.g. air conditioning, are turned off during Mobileye 8 Connect
installation to prevent battery drainage.