Technical Installation Guide (4G) v1.9
www.mobileye.com
13
Mobileye 8 Connect
5.4 Ferrite
5.4.1 Ferrite for Power Sources -Model 1 (ITM000786)
5.4.2 Instructions for power sources (CAB000371)
Please follow the instructions bellow for the two ferrites
installation:
1.
Place both Mobileye
BAT+
wire and
Ignition
wire (CAB000371)
together inside the first Ferrite.
2.
L
ocate the Ferrite 5cm from the Mobileye CAB000371 label
3.
Wrap the
BAT+
and
Ignition
wires through the Ferrite 2 times
and
around the outside
of the Ferrite 1 times, as shown in the figures
4.
Place the Mobileye GND wire in the second Ferrite
(
locate the Ferrite filters 5cm from the Mobileye
CAB000371 label).
5.
Wrap the GND wire through the Ferrite 2 times and around the outside of the Ferrite
1 times, as shown in the figures
The Ferrite size and shape may vary different between different Ferrite models.
Ferrite installation on power lines is mandatory in CE marking countries.
Ferrite installations are not mandatory for FCC and E-Mark certificates.