Troubleshooting
Dual Band EnCOVER VE™ Instant Coverage Solution User Manual
51
3. Set Identify to ON. The Activity LED (Blue) on the corresponding Access Pod will start
blinking fast. (You will need to physically locate the VAP to see the blinking LED).
4. Locate the Access Pod.
5. Once found – it is advisable to assign it an identifiable name via the Access Pod Module
Info tab as described in section
5.3 (e.g. floor 3, conf. room) and set the Identify field to
Off again.
Blue LED (Activity)
Green LED (PWR)
