VCU Unit Installation and Configuration
Dual Band EnCOVER VE™ Instant Coverage Solution User Manual
27
5. Click
the
Modify button to define the STATIC IP Address according to existing LAN.
Note: After the initial IP configuration, the Master VCU can be accessed remotely via
Ethernet.
•
Set the following available parameters:
•
DHCP - Dynamic Host Configuration Protocol (N/A)
•
IP address - Static IP address
Default definitions:
•
The Default IP Address : 192.168.1.1
•
The Default Subnet Mask: 255.255.0.0
•
The Default Gateway: 192.168.254.254
•
Click OK.
6. Log out and then log in again with the new IP settings.
7. Select
the
Config tab in the main menu bar.
