Navigating the Management Application
Dual Band EnCOVER VE™ Instant Coverage Solution User Manual
47
6.3.6
Service Tabs (RF Parameters)
The Service 1 and Service 2 tabs provide the configurable RF parameters corresponding to the
element selected in the network topology tree (VCU/VAP). Up to two service RF tabs are
displayed – one for each
active service. The displayed RF parameters are similar for both service
tabs.
6.3.6.1 Master
VCU/Slave VCU Service RF Tab
Note: The RF parameters are not displayed for control units functioning as slaves to Master VCU
units.
To access the Service RF tab
Click the Config tab from the main menu bar and then select the control unit from the network
topology and click the
Service RF tab. The parameters displayed in Service RF tabs correspond to
the selected element.
Selected
Master VCU
