VCU Unit Installation and Configuration
Dual Band EnCOVER VE™ Instant Coverage Solution User Manual
33
To assign a name to a Slave VCU:
1. Connect to the Master VCU unit (either locally as explained in section
4.4.1 or remotely) and
select the Slave VCU to be provisioned from the Network Topology Tree.
Each VCU has a default name of the form “VCUPx-name”, where:
•
Px - Master VCU port number to which the Slave VCU is connected
•
Name - user-defined name
2. To assign the Slave VCU an indicative name:
•
Select the Module Info Tab
•
Click the Modify button
•
Type the unit name (up to 20 alpha-numeric characters) and click OK.
4.5 What
Next?
Do not disconnect the Web Management application from the Master VCU; you will be using it to
verify the connections after all the VAPs are placed in their locations.
Click Modify
Selected Slave
VCU-
