Novodiag® System User Manual (NVD-SYST-UM)
V4-0 – April 2020
13
NOTE The Novodiag® Software is navigated in the same manner as any typical touch device. Most actions are
performed by tapping, some require scrolling. No double tap is required. Navigation is from left to right.
The Novodiag® Software opens on a login screen, allowing each user to log in individually (see Figure 11). The
stack view on the right displays status of each connected Novodiag® instrument. First the user selects their name
and then enters the pin code on the pin pad (see Figure 11). Login will occur automatically and the Home View is
displayed.
NOTE To comply with operator traceability, it is recommended for the user to log out from the session when not
using the system. Also, before starting a run, please check the username on the screen to make sure that you are
the right user logged in.
The Home View reflects the physical setup of the Novodiag® Instrument and is divided in two parts:
Stack view on the left
Instrument view on the right, divided in slot panes
At the very top of the screen, the user can navigate to following views:
Home view
Results view
System Setup view (for admin users)
Return to Login view (through “Logout” button)
Buttons available at the bottom of the screen offer additional functions that are connected to the current view.
For example, in the Home view, the “Start new test” button and, when applicable, the “Eject all completed” button
are available.
5.3.
Home view
Stack view (see Figure 12 and Table 6)
The Stack view enables to get an overall status of all connected Novodiag® Instruments.
Tapping on instrument icons allows to select which instrument view to display.
Figure 12. Home view
Summary of Contents for Novodiag NVD-BCS-A NVD-TSCA-A
Page 2: ......
