Novodiag® System User Manual (NVD-SYST-UM)
V4-0 – April 2020
9
Figure 7. Top view of the Novodiag® Instrument and Arm
Each Novodiag® Instrument has one independent power plug. In case of stack (2 to 4 instruments), each
Novodiag® Instrument will have its own power plug plugged into the power strip and 1 socket will be dedicated
to the Touchscreen Computer. The power supply is compatible with voltage 100 - 240 VAC, 50 / 60 Hz, 600 W.
4.3.
Packaging content
4.3.1.
Novodiag® Instrument package
Each Novodiag® Instrument is shipped in a wooden box mounted on pallets. The Novodiag® Instrument package
size is W80 x D60 x H70 cm and contains:
One Novodiag® Instrument shipped with transport cartridges to secure the
module (yellow cartridges)
Power cables and connection cables
The Touchscreen Computer, the Barcode Scanner and the Post or Arm are delivered in
separate packages.
CAUTION
The Novodiag® Instrument unpacking must be performed by Mobidiag representative only.
CAUTION
Transport cartridge are only used to prevent any damage during shipment.
4.3.2.
Novodiag® Test Cartridges kit
Refer to the Novodiag® Test specific Instructions for Use.
4.4.
Installation
CAUTION
The Novodiag® System installation (or conformation change) and qualification require specific
equipment and training and must be performed by Mobidiag representative only.
4.5.
Getting started with the Novodiag® System
4.5.1.
Starting up the Novodiag® Instrument
Start the Novodiag® Instrument by switching on the power plug in the back of the instrument (see Figure 8).
Alternatively, using a stack, switch on the power strip provided with the Novodiag® Instruments.
Summary of Contents for Novodiag NVD-BCS-A NVD-TSCA-A
Page 2: ......
