Mobeye CM-Guard TwinLog CML2055, User Manual

Page: 21 / 40

20
5.4 SET A MINIMUM AND/OR MAXIMUM TEMPERATURE LIMIT
A separate high and/or low limit for the temperature can be set. All limits can be set
between -35 and +70 ºC, with one decim
al. Negative values are set by a “-” before
the value.
5.5 LOG INTERVAL
When using the Mobeye Internet Portal the Mobeye CML2255 will log values and
send these to the portal. The logging interval is the interval in which the measured
values are logged (with a timestamp). The data are stored in the system until the
next data transfer. The logging interval can be set between 0 and 9999 minutes. The
default log interval is set at 60 (minutes).
5.6 TRANSFER INTERVAL
If the log interval is active the recorded values are periodically transmitted to the
Portal during the data synchronisation. The transmission interval can be set between
1 and 999 hours. The standard transmission interval is set to 24 (hours).
5.7 ALARM REPEAT TIME
In order to emphasize the urgency of the temperature and other alarm messages, all
alarms can be repeated. As long as the temperature or inputs have not returned to
the inactive status, the textual messages (no phone calls) will be repeated after the
‘alarm repeat time’. A repeated temperature alarm includes the actual temperature.
The repeat interval can be set between 0 (no repeat) and 24 hours. As default the
alarm repeat time is set to 0 hours.
5.8 TEMPERATURE DELAY TIME
The temperature delay time defines the duration a temperature limit is violated before
an alarm is initiated. If the temperature returns to the non-alarm status within the
delay time, no alarm is sent. The time can be set between 0 and 999 minutes.
As default, the temperature delay time is set to 0 minutes.