Mo-vis Micro Joystick Omni Installation Manual Download

Page: 36 / 55

FAULT

REASON

REQUIRED ACTION

MSP command

unknown

Unknown command

was received

MSP sub command

unknown

Unknown sub com-

mand was received

MSP argument invalid

Invalid argument

received

Connection with the PC

went wrong. Update

firmware (contact mo-

vis) or update the Con-

figurator Software. Try

again.

MSP device not ready

Device was not ready

to receive an MSP com-

mand

MSP device wrong

state

The device is not able

to receive a command

in the current device

Connection with the PC

went wrong. Update

firmware (contact mo-

vis) or update the Con-

figurator Software. Try

again.

PCB test failed
Assembly test failed

Factory test failed

Field test failed

Field test failed (cali-

bration)

Contact mo-vis

Test flag check

One or more test flags

not set

Redo tests and/or con-

tact mo-vis

Micro Joystick Installation manual 35

Summary of Contents for Micro Joystick Omni
























































Search results

Summary of Contents for Micro Joystick Omni

Reviews:

Related manuals for Micro Joystick Omni

Brands by name

Popular brands

Mo-vis Micro Joystick Omni, Installation Manual

Search results

Summary of Contents for Micro Joystick Omni

Reviews:

Related manuals for Micro Joystick Omni

Brands by name

Popular brands