WARNING:
Place the Interface unit with the connectors facing
downwards. This is to prevent water from entering the Interface
unit.
6
Place a power on/off (pwr) and/or mode (in) switch, secure their cabling
and insert their connections. You can use the connections on the
Interface unit.
CAUTION:
Before inserting a connector, remove the protective
cover. If the connections are not used, always put or keep the
protective covers in.
CAUTION:
This is Class I Medical Device (
MDR 2017/745
). All
accessories, including switches, must also comply with the
MDR
2017/745
regulations (e.g. the mo-vis
Twister
, tested according to
EN12184
standards).
7
Connect the cabling to the wheelchair electronics.
CAUTION:
All wheelchair electronics must be switched off during
installation.
14
14 Micro Joystick Installation manual
