3
IMPORTANT SAFETY INSTRUCTIONS
Before using your appliance, read carefully the instructions
contained in this booklet, which furnish important information
regarding installation, use and maintenance safety. The booklet
must be keeped and delivered to the new user in case of ces-
sion of the machine.
The Manufacturer reserves the right to vary the features of the
product without prior notice. The technical data are merely in-
dicative.
1. This appliance is intended exclusively for the use for which
it was created, to dry the hands by means of flowing warm
air, and the Producer would not be considered responsible
for any damage caused by its improper use.
2. After unpacking, make sure that the appliance is complete
and shows no signs of visible damage or tampering.
3. Keep packing materials, which are potential dangers, away
from children (plastic bags, styrofoam packing pellets,
nails, etc.).
4. Before inserting the plug make sure that the voltage is
the same as indicated on the device and the line supply is
corresponding to the effective rules.
5. Do not use in presence of gas, inflammable or explosive
liquids or substances.
6. Some fundamental rules which apply to all electrical
devices must be observed when using the appliance:
• do not touch the heather with wet hands;
• do not handle with bare feet;
• do not pull the electric cord or the device itself to
unplug it from the socket; pull the plug directly;
• do not let children or incompetent people use device
without supervision.
7. The appliance is not suited for persons (as well as
children) physically, mentally, sensory disabled, or with no
experience, unless they have been supervised or directed
by someone responsible of their safety.
8. Children should be supervised to ensure that they do not
play with the appliance.
9. Do not bring modifications to the product that compromise
the safety.
10. Keep connections dry.
11. If the power supply cord is damaged avoid to use it. Let
the Manufacturer, or the After Sale Service, or some similar
qualified person replace it, in order to avoid any risk.
12. Disconnect the appliance from the supply line, if you don’t
use it for a long time.
13. Always unplug the appliance before doing any mainte-
nance operation.
14. Periodically verify the integrity of the appliance. If defects
are found, do not use it; call an Authorized After Sale
Service.
15. In case of malfunction or fault, call an Authorized After Sale
Service, and request original spare parts.
In case of steady connection to the wire, a bipolar
circuit breaker with contact opening distance of at
least 3 mm must be fitted upstream from the sup-
ply line.
This hand dryer must be installed out of the range of
a person using the bath or the shower.
EN
USE AND MAINTENANCE
Disconnect the appliance from the power supply
when not used.
For safety reasons, never attach the device above
bath tubs, wash basins, showers, or other fittings
where there may be water.
FEATURES
The mod.715 (with plastic shell) and the mod.716 (with metal
shell) electronic hand dryers have a double protection device in
the heating element, that makes the machine stop automati-
cally after 60 seconds of continued work. The main features of
the appliances are high power, easy installation and use, safety
and reliability.
FITTING INSTRUCTIONS
This appliance is intended for indoor use only
The hands dryers have been specifically designed
for vertical attachment on the wall with the air out-
let toward the bottom.
Make sure that the wall where you plan to mount
the appliance is solid and free of electrical cables or
water pipes inside.
Position
• The appliance can be installed and used in bathroom, wash-
room, kitchen, etc.
• The distance should be around 110 cm from the ground.
• Keep a certain distance between the dryer and the door, to
avoid hits when opening and closing the door.
Installation
1. Following the diagram in Fig.1, drill 4 holes on the wall.
2. Take the shell of the appliance away from the body, un-
screwing by a screw-driver.
3. Fasten the body to the wall, by means of 4 dowels (pro-
vided).
4. Fasten the shell to the body by screws.
5. Connect the appliance to the power supply.
FUNCTION
• The hand dryer works automatically. After washing your
hands, put them near to the wind hole, located at the bot-
tom. The warm air flows immediately. As your hands leave
the air outlet, the appliance automatically stops, in order to
avoid infection of germs.
• If you wish a cold air flow (ambient temperature) switch the
heating element off pushing the red button at the bottom of
the appliance
• To short the work time, please shake the water away from
your hands before the use.
