Midor
27
Rev. 1.1
Midor iOS User Guide
Troubleshooting
Fault
Repair
The instrument cannot be turned
on
Check batteries, replace batteries
The green light indicator is fleshing
with 1 second period
(0.5 of a second is on + 0.5 of a
second is off)
The Bluetooth module initialisation is faulty. Turn the instrument off and on.
A slow response to the pressure
change in inputs, the measured
value when the pressure inputs are
free is higher than 1 kPa
The replacement of filters in the pressure inputs. Reset pressure measuring.
The pressure unit Bluetooth search
is not functional, or the Midor
application is unable to connect
with the pressure unit after
pressing
Connect
, refer to the
picture on page 9
Check the Mobile device setup. If you have the Midor pressure unit paired with the
mobile device, unpair it. BLE does not pairing of the Bluetooth device as the
previous version required; quite contrary, the pairing impedes the connection
making..
The application does not connect
with the pressure unit in the
measuring window, the last picture
on page 9, or the start or record
reading stops
Turn off the pressure unit and on again, repeat the requested application’s function.
Turn off the Bluetooth in the mobile device, turn it on again, and repeat the
requested
application’s function.
I have entered the
Always use
In the Midor application setup go to the
Sensor setup/Always use Bluetooth
