background image

GENERAL

WARNING

This product must be disconnected from the circuit if subjected to any high voltage or 
insulation resistance testing. Irreparable damage will occur if this instruction is not followed.

For non-emergency versions: 
 
GENERAL 

This product contains a light source of energy efficiency class D to Regulation (EU) No. 2019/2015. 

This product contains an LED light source which can be replaced by the end user and a control gear which can 

be replaced by a professional. 

 

Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the 

product. 

Do not use any source of high-pressure washers to maintain or clean this luminaire. 

This product is non-dimmable. 

This product should be dismantled for disposal when it reaches the end of its life. Please see website for 

dismantling instructions. 

This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities 

for where facilities exist.  

 

 

 

For emergency versions: 
GENERAL 

This product contains a light source of energy efficiency class D to Regulation (EU) No. 2019/2015. 

This product contains an LED light source which can be replaced by the end user and a control gear which can 

be replaced by a professional. 

 

Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the 

product. 

Do not use any source of high-pressure washers to maintain or clean this luminaire. 

This product is non-dimmable. 

This product should be dismantled for disposal when it reaches the end of its life. Please see website for 

dismantling instructions. 

This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities 

for where facilities exist.  

The batteries in this luminaire are Lithium Ion and must be disposed of correctly. Please contact the local 

authorities for the disposal of this toxic waste. 

This product contains a light source of energy efficiency class E to Regulation (EU) No. 
2019/2015. and (UK) 2021 No. 1095.

This product contains an LED light source which can be replaced by the end user and a 
control gear which can be replaced by a professional.

  

Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which 
may damage the product.

Do not use any source of high-pressure washers to maintain or clean this luminaire.

This product is non-dimmable.

This product should be dismantled for disposal when it reaches the end of its life. Please 
see website for dismantling instructions.

This product should be recycled in the correct manner when it reaches the end of its life. 
Check local authorities for where facilities exist. 

Summary of Contents for TPR14LEDS









Reviews: