SENSOR LAYOUT
Fig. 3
•
The additional terminal called Slave Live (SL) is available to enable the sensor to power on additional
luminaires. A max. LED load of 500W can be controlled by the sensor
•
See below for adjustment of the sensor settings
•
Close the hinged gear tray until the tab clicks into position
•
Reattach the diffuser and secure with the three screws ensuring the seal is in place and not
damaged
•
Switch on and check for correct operation
SENSOR LAYOUT
WARNING
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
GENERAL
This product contains a light source of energy efficiency class E
to Regulation (EU) No 2019/2015.
This product contains an LED light source which can be replaced by the end user and a control gear which
can be replaced by a professional.
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the
product.
Do not use any source of high-pressure washers to maintain or clean this luminaire.
This product is non-dimmable.
This product should be dismantled for disposal when it reaches the end of its life. Please see website for
dismantling instructions.
This product should be recycled in the correct manner when it reaches the end of its life. Check local
authorities for where facilities exist.
WARRANTY
