MKS Instruments UK Ltd
V2000-P Hardware Manual
– SP102006.103 March 2013
13
Electrical installation
WARNING
The electrical installation must be carried out by qualified
personnel in accordance with local standards and regulations.
The electrical installation should be carried out after the vacuum system installation. Please follow the next
sections, in sequence.
Electrical specification
See the RVC2 and Microvision2 User Manuals for specifications
WARNING
This appliance must be earthed
Equipment rack
The Remote Vacuum Controller (RVC2) is fitted into a 19 inch sub-rack. The sub-rack should be fitted into a 19
inch equipment rack using four M6 screws, plastic cup washers and cage nuts.
Interconnecting cables
All the cables which run between the equipment rack and the RGA vacuum chamber are fitted into plastic
trunking which provides a good degree of protection. The trunking complete with cables will be supplied
completely disconnected. All the cables have been marked at both ends and have been chosen to minimise the
risk of making a wrong connection. The table below gives cable functions and cable destination.
Mains power
There is a single mains power connection to the Vision 2000-P which is made to the RVC2. Connect the mains
power cable to a suitable single-phase supply:
See the RVC2 User Manual for specifications
