MKS Spectra 138A, Instruction Manual

Page: 23 / 48

PAS Trolley Manual
LP101017 Rev 1.02
Page 15
Section 3.
Installation
Caution
Initial installation and setup should only be carried
out by MKS engineers.
3.1. Environmental Requirements
The following guidelines are intended to assist with the installation
and use of the Type 138A Portable Analytical System.
1. Only use the instrument in a situation where the normal operating
temperature of between 15
°
C and 30
°
C will always be maintained.
2. Ensure that the instrument is always used in the correct orientation
and kept away from any sources of dust, oil or water.
3.
Do not attempt to move the instrument whilst connected to the
mains power supply.
4. Keep the ventilation panels and base of the instrument clear of any
obstruction.
5. Do not subject the instrument to sharp knocks or continuous
vibration.
6. The instrument MUST NOT be connected to any source of
hazardous or toxic materials.
Caution Failure to observe these environmental conditions
could result in damage to the instrument.