MKS PR 4000 F, Instruction Manual

Page: 40 / 69

Chapter 4: Operation PR4000F
32
Exit Setup
RESET All error messages will be reset.
DEFAULT F Setup menu will completely set to standard settings for MFC’s and MFM
DEFAULT P Setup menu will completely set to standard settings for Baratron pressure
transducers.
In appendix B you will find a complete table showing the default settings for both
flow and pressure.
RESOL16 activated (indicated by a diamond shaped sign):
4,5 digit display format,
recommended for pressure measurement with Baratron pressure
transducers.
De-activated (no diamond sign):
3,5 digit display format,
preferable for flow measuremnt and control with thermal flow
devices.
EXIT Leaves the setup submenu. To enter again the setup section you must select SETUP again.
Note
Resolution and conversion rate are dependent of the display format.
Refer to Appendix A,
Specifications .
RESET DEFAULT F
RESOL16
♦
EXIT