MKS PR 4000 F, Instruction Manual

Page: 13 / 69

PR4000F Chapter 1: General Information
5
Chapter 1: General Information
1.1 General Description
The control unit PR4000F is designed for the use with mass flow controllers (MFC), mass flow
meters (MFM), pressure transducers and in-line-pressure controllers, e.g. type 640 from MKS
Instruments. Compatibility is just restricted in case of disagreement of electrical specifications.
The PR4000 is available as single or dual channel power supply, readout and control unit. This
instruction manual however describes only the dual channel version PR4000F. Two or more units
PR4000 can be combined thus performing multichannel control units.
Further features:
•
Display format four or five digits, selectable
•
2 trip limits and 2 relays, can be combined and configured in a wide variety of functions and
combinations
•
linearization possible for both channels
•
Interface either RS232 (standard) or RS485 (optional)
•
3 different power supplies: ±15 V / 0,8 A (standard); ±15 V / 1,5 A (optional) ; 24 V / 1 A
(optional)
•
two line display, configurable, allows simultanous readout of both channels or one channel
actual value plus setpoint
•
physical values displayed with engineering units
•
non volatile memory for easy restart after power loss or switching off power
For more details and specifications refer to Appendix A, Specifications