Setting up the unit
22
Installation instructions
5.6 Fastening the unit to the floor
5.6.1 Securing the unit against tilting
WARNING
Risk of accidents from inadequate fastening
The unit may tip over
•
The unit must be fastened to the floor by suitable methods
depending on the type of unit.
•
Observe the requirements for the condition of the floor.
•
Observe the requirements for the type of fastening.
•
Note the instructions from the manufacturer of the
fastenings.
Depending on the size, it is mandatory that certain types of
Combisteamers are secured against tilting, and this also applies to
Combisteamers in conjunction with a stacking kit, air recirculation
hood, base frame or base cabinet.
Types of units, which must be secured against tilting (see "Unit and
connection data").
1
1
2
2
c
a
d
b
Image: Arrangement of the floor plates (view from above)
a Equipment leg with castors
c Cooking zone door
b Equipment leg
d Floor plate
A special fastening set, which secures the unit against tilting, is
supplied by the manufacturer or is available as an accessory.
The fastening set comprises two floor fastenings and all the
necessary components for screwing or bonding them to the floor.
The unit or base frame is fastened with two floor fastenings as shown
in the drawing.
4127002--0AIBE-C
