A06 Minimum
adjustment
Sets the minimum tempe-
rature value among those
that can be set in the hourly
or manual programming
phases; through this fun-
ction the chronothermostat
will not be able to guaran-
tee a temperature lower
than the set one
1 °C to
10 °C
5° C
5.9
A07 Maximum
adjustment
Sets the maximum tempe-
rature value among those
that can be set in the hourly
or manual programming
phases; through this fun-
ction the chronothermostat
will not be able to guaran-
tee a temperature higher
than the set one
From
30 °C to
70 °C in
steps of
1 °C
35 °C
A08 Weekly
program
selection
Sets the type of weekly
programming of the chro-
nothermostat
See
chapt.
5.4
5.3 – System settings
The system settings menu allows you to adjust cer-
tain parameters to suit the installation situation: most
of these settings must be made immediately after
the first start-up and are not normally required to be
changed subsequently; in some cases the default
value can be kept for optimal operation.
To access the system settings menu, the thermostat
must be in the off situation: if it is on, press press
