5.5 - Bands programming
1. If the thermostat is on, go to step 2, otherwise
press or to turn it on
2. With the backlight on, press [PRG] for a few
seconds: the icon appears on the top right
display and the hours indication flashes in the
bottom left of the display, indicating that you are
proceeding to set the start hours of the first band
(awakening). In the upper part of the display are
indicated the days in which the band being set
will be active.
3. Press the [+] and [-] buttons repeatedly to select
the start hours of the band, then press [PRG];
the flashing goes from hours to minutes
4. Press the [+] and [-] buttons repeatedly to select
the start minutes of the band, then press [PRG];
the flashing changes from minutes to tempera
-
ture
5. Press the [+] and [-] buttons repeatedly to select
the desired temperature in the band, then press
[PRG]: the icon of the chronologically next band
appears at the top left
6. Repeat from point 4 to point 6 for the remaining
five bands, in sequence
(morning exit),
(mid-day return), (mid-day exit), (eve-
ning return), (night).
7. If the MON-SUN weekly program has been se-
