20
noTe: The HD-101R is not designed to cut plastic or ferrous (metals) material.
The HD-101R is a versatile Tile Saw. Operated and used according to this manual, the HD-101R will
provide years of dependable service.
Voltage
120V
overall amperage
13
motor only amperage
14.5
Frequency
60 Hz
rpm
3400 rpm
Horse power
1.5 hp
weight
92 lbs
HD-101r SaFeTY
proDUCT SpeCiFiCaTionS
The HD-101R Tile Saw is engineered as a tabletop or stand mounted wet tile saw. The saw includes
a powerful 120V totally enclosed capacitor start Baldor motor with a thermal protective overload. The
saw is capable of cutting tile up to twenty (20) inches in length, or diagonal cutting tile up to fourteen
(14) inches. The saw can cut an object three (3) inches thick in one pass.
Motor specifications for the HD-101R are listed in table below.
The motor is protected by a thermal overload equipped with a manual reset.
Motor Specifications
Thermal overload protection
General Specifications
Blade Capacity
The HD-101R uses a ten (10) inch (254mm) diameter, wet cutting continuous rim, diamond blade
with a five-eighths (5/8) inch (15.875 mm) arbor.
Tile Types
The HD-101R can cut a variety of tile types including Porcelain, Terracotta, Marble, Quarry and Slate,
or almost any other non-ferrous material.
A
B
D
C
E
J
I
H
G
F
A Motor
B Water Pump Tube
C Blade Guard
D Cutting Table
E Water Basin
F Frame
G Guide Bar
H Post
I
Depth of Cut Adjustment Knob
J
Belt Guard
