28
BX-3 TROUBLESHOOTING
Verify the Lockable Switch is unlocked and the saw is disconnected from the
power source before performing any troubleshooting procedure.
TROUBLESHOOTING
MOTOR STOPS TURNING
BLADE WILL NOT CUT PROPERLY
WARNING
ON
(
(
)
)
(A)
Verify all plugs fully
connected. If connect-
ed, go to Step B.
(A)
Check for smoothness or
"Glazing". Dress blade if
needed.
(D)
Verify Circuit Breaker
not tripped.
(E)
Verify source voltage
is 120 volts.
(B)
Check Ground Fault Circuit
Interrupter (GFCI) tripped.
(B)
Check for proper rotation.
(C)
Verify Circuit Breaker
is 20 Amp or greater.
(C)
Ensure blade core is
not bent.
