27
(A)
Remove one Motor Brush
Cap. There is one motor
brush on the front and one
on the back of motor.
(D)
Install Motor Brush Cap.
(E)
Install the second motor
brush. (Repeat Steps A to D)
(B)
Remove Motor Brush and
clean brush housing.
(C)
Align and install new
Motor Brush.
BX-3 MAINTENANCE
Disconnect the tool before servicing and when changing accessories, such as
blades, bits, cutters, and the like.
When installing motor brushes, care must be taken to ensure the spring end is
straight before installing the Motor Brush Cap.
MOTOR BRUSH CHANGE-OUT
WARNING
NOTE
ON
(
(
)
)
