25
MOVABLE CUTTING TABLE WHEEL CHANGE OUT
BX-3 MAINTENANCE
(A)
Place Movable Cutting
Table on work bench with
Roller Wheels up.
(D)
Install Roller Wheel retain-
ing nut - tighten. Lubricate
Roller Wheels.
(B)
Remove Roller Wheels and
clean holes.
(C)
Install wheel/washer assembly into
Movable Cutting Table.
(D)
Install Outer Flange and retaining
screw - tighten.
All four (4) Movable Cutting Table, Roller Wheels should be replaced at the same time
(MK Diamond P/N 133090).
NOTE:
When installing the retaining bolt, DO NOT "Cross Thread" and DO NOT
over tighten the nut.
NOTE:
