13
BX-3 SAFETY
Decal/Label Location
Description
A
Arm
Warning - Silica
B
Motor
Warning - Read Manual
C
Arm
Service/ Warranty
D
Arm
QR Code for Manual
E
Arm
Notice - Extension Cord
F
Blade Guard
Caution - Guards in Place
G
Blade Guard
Warning - Replace Blade Guard
SAFETY LABEL LOCATIONS
Safety labels contain important safety information. Please read the information contained on each
safety label. These labels are considered a permanent part of your saw. If a label comes off or
becomes hard to read, contact MK Diamond or your dealer for a replacement.
Part # 164202
A
B
F
C
E
G
D
Part # 154398
Part # 154398
Part # 155038
SERVICE OR
WARRANTY
FOR INFORMATION ON
PLEASE CALL
1-800-474-5594
Part # 155672
Part # 155588
NOTICE
Most motor problems are caused by
low voltage from improper extension
cords. See owner’s manual for
extension cord selection.
!
Part # 170480
Scan for manuals
CAUTION
DO NOT
operate without
guards in place.
!
DO NOT operate
this equipment
before reading the
owner’s manual.
WARNING
!
WARNING
• Use of this equipment can expose you to chemicals
including nickel and crystalline silica which are known to
the State of California to cause cancer.
• For more information go to www.P65Warnings.ca.gov.
• Repeated and/or substantial inhalation can cause
serious or fatal respiratory diseases including silicosis.
• Employ dust controls and protection per
OSHA/NIOSH/MSHA.
!
Label Part #164202
WARNING
In the event of blade
failure, replace
blade guard
immediately.
!
B
F
A
E
G
C
D
