CHAPTER 6
ELECTRICAL SYSTEM
- 28 -
29z
be used to create AC power if either the generator or shore-power is active and the inverter
breaker is ON.
INVERTING
To use AC power when no generator or shore-power is available, make sure the inverter breaker
is ON. AC power should now be supplied to the AC Panel, which includes those items which may
be run from the inverter alone…although not necessarily all at the same time for very long. The
inverter can only be powered by the house bank. When finished using AC power through the
inverter turn the inverter switch OFF.
CHARGING
Turn the CHARGE switch ON to activate the charger when SHORE POWER is applied to AC
Panel or when GENERATOR is on.
DO NOT LEAVE THE INVERT SWITCH “ON” IF YOU ARE NOT
INVERTING AS THIS MAY DRAW 10-12 AMPS EVEN IF NO AC DEVICE IS TURNED ON. OR,
YOU MAY END UP WITH DEAD BATTERIES.
6.10.
FUSE LOCATIONS & SPECIFICATIONS
CIRCUIT
TYPE
MFG
PN
AMPS LOCATION
HOUSE BANK
ANL
ANCHOR
606250
250
PORT BULKHEAD
MAIN DC PANEL
ANL
ANCHOR
606100
100
STARBOARD ENGINEROOM BULKHEAD
CHARGER
SIDEPOWER THRUSTER
ANL
IMTRA
SMANL250
250
STARBOARD HULL BEHIND INVERTER
BATTERY SENSE
AGC
ANCHOR
601030
3
TERMINAL STRIP HOUSE BATTERY
SEALAND VACUFLUSH
AGC
ANCHOR
601030
3
VACUFLUSH HOLDING TANK
RADIO MEMORY
AGC
ANCHOR
301200
20
TERMINAL STRIP HOUSE BATTERY
BILGE PUMPS
AGC
ANCHOR
601075
7.5
ON HELM DASHBOARD
