7
2.
Button Operation
UP
Left Right
DOWN
Use button switch and LCD display, can set the address code and function code easily.
Check or modify lighting function settings, Press the
LCD
display
or
OK
button. LCD display panel
will display main menus. Function operation menu all have corresponding submenu . Each menu all
represent the specific functions of lamps, specific see below "operation menu" section.
Set or browse function setting of lamp, Press
UP
or
DOWN
key.
Press
LEFT
and
RIGHT
keys function the same way: return to the previous interface
Press
OK
key to save your changes or to enter submenu, Press
UP
or
DOWN
can change value(Plus
or reduce number).
Operation Menu:
Menu Structure chart
1
. Setting menu
Options
Instructions
The operation
mode
DMX
From the machine status: receiving DMX signal from the controller or host
automatic
Host: run automatically, and send the DMXD signal from machine
Voice control Receiving external sound or vibration, run the built-in application effect
DMX address
1-512
Press "OK" button to enter edit state. At this point is selected to one
hundred, according to the "up" "down"
Key change address code. Press the "OK" button once again and selected
10 editing. Press again
"OK" button to select bits editor. Then exit the editor state at a time.
The channel
model
16
17-20 channel is invalid
20
17-20 channel control speed (see channel table)
X inversion
Guan/open
Y inversion
Guan/open
XY
The encoder
guan
Do not use the encoder (light coupling) correct position
op
Using encoder (light coupling) judging out-of-step and automatically
correct position
No DMX signal
keep
According to the original state continues to run
reset
The motor return, stop running
The screen
open
Close the backlit idle for 30 seconds
OK
