8
saver
gua
Back lit yongliang
Switch on light
bubble
open
When start the lamps and lanterns, lamp light up automatically
guan
Start the lamps and lanterns, the bulb is not bright
Restore the
default Settings
no
yes
Press "ok" is to restore the default Settings
2. Information
menu
Options
Instructions
Software version
The current software version (K12.003)
Fan speed
Display fan speed
Total light soaking time
Total light bubble time (accurate to minutes)
The light soaking time
The light of this boot since bubble time (down to minute)
DMX channel value
In the condition of DMX, showing all channels of value (number), thus the child
into the interface, display as a percentage value and channel value for viewing
System error record
If red ERR lights shine, then failed to reset run out of step, can enter child interface
for details.After the view can press "ok" the error record to empty
3.Manual control
menu
This interface is used to control the current lamps and lanterns, neither belongs to the state machine from machine
shape (not receiving DMX signal) also does not belong to the host shape (not send DMX signal)
Options
Instructions
Reset
Click "ok" button after see confirmation dialog, press the "ok" key once again, after
carry into the interface, reset all motor
The light bulb control
ON/OFF
The color wheel
0-255
Press "ok" button to enter edit state. At this point is selected, click on
"next" button to change channels values, press the "ok" button once
again and exit the editor.
。
。
。
。
。
。
0-255
Pattern plate speed
0-255
4. Advanced interface
To enter the show advanced interface, please enter the password: XXXXXX. Specific operation process: press the
up and down key to choose Numbers (a *) at a time. Password input after fully, finally press the "ok" key password
authentication.
Options
Instructions
The biggest bright time 0-9999
Can be set up on time
Encryption scheme
Off
The number of
Can be set up the use of light times
time
Can be set the use time of light
Encryption parameters
(frequency/time)
0-9999
After the encryption mode to open the work. Can be set up the
use of lamps and lanterns (number/time)
