Most important: FIRST CHARGE THE FIXTURES FOR 6-8 Hours on the First
Charge before use. Plug in Power cord. Turn ON charger Switch to charge.
Introduction
Unpacking:
Thank you for purchasing this product, all products has been thoroughly tested
and has been shipped in perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears to be damaged,
carefully inspect your fixture for any damage and be sure all accessories necessary to operate
the unit has arrived intact. In the case damage has been found or parts are missing, please
contact the manufacturer or your dealer for further instructions. Do not return this unit to your
dealer without first contacting.
Introduction:
The Light is a DMX intelligent and battery powered LED par light. This par
light is light weight and compact which makes it a great piece for mobile DJ
‟
s and clubs.
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit
under water.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs
yourself; doing so will void your manufactures warranty. In the unlikely event your unit may
require service please contact the manufacturer or your dealer.
PLEASE recycle the shipping carton whenever possible.
General Instructions
To optimize the performance of this product, please read these operating instructions carefully
to familiarize you with the basic operations of this unit. These instructions contain important
safety information regarding the use and maintenance of this unit. Please keep this manual
with the unit, for future reference.
Notice :please pay attention to ventilation, to prevent the battery
overheat cause burning When charging.
1
For Battery Function and Charge
The unit has the function of battery powered. The button for battery and
charge is set on the rear panel. It is showed as the following picture, and the
function is described as below.
1. Alpha-numeric display 2. Button switches 3. Battery indicator
4. DMX-Out 5. Power out 6. Antenna
7. Switch for charger and Power ON 8. Power in
9. DMX-In
8
