Remote Operation
Note:
1, UP-dimming the up button
2, Down- dimming down button
3, OFF- Turn off light
4, ON- Turn on light
5, R, G, B, W, A, UV keys are 6 kinds of each color
6, 9 numeric keys for 9 static colors (AC 1...AC 9)
7, 0 button for mixed color mode, up and down adjust 32 kinds of static color
8, AUTO button is the color change mode, the up and down keys adjust speed
9, STROBE button is color strobe mode(optional 32),up and down adjust speed
10, FADE button is the gradient mode, the up and down keys adjust speed
11, SOUND button is the voice control mode,up and down adjust the voice control
There are two buttons on the rear panel of the lighting. One is for power,
and the other is for signal.
●
When use the fixture with DMX, not wireless, please switch the signal
button for “off”
●
When use the wireless DMX, please switch the button for “on”
●
When charge the light, please switch both of the button for “of”. At the
same time, if the switch for power is “on”, the light will be at work during the
process of charge, but will consume some power from the charge; if the
switch for power is “off”, the light will be blackout and not be at work.
6
walked on or pinched by items placed upon or against them, paying particular
attention to the point they exit from unit.
● Cleaning
-The fixture should be cleaned only as recommended by the
manufacturer. See “Cleaning” for details.
● Heat
-The appliance should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including amplifiers) that
produce heat.
● The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked
change in performance
● Fuse standard is 2A/250V
● Grounded using yellow/green line
● The ambient temperature must always be under +35° C
Set Up
Power Supply:
Before plugging your unit in, be sure the source voltage in
your area matches the required voltage for your light is workable in
100-240V/50~60Hz. Because line voltage may vary from venue to venue,
you should be sure your unit voltage matches the wall outlet voltage before
attempting to operate you fixture.
Operating Instructions
Operating Modes:
You can use the light in 5 ways:
● Sound activation
– The unit will activated by the sound signal.
● Static display
– The unit will display the color in static way.
● Auto Mode
-The unit will automatically chase through the different patterns.
● DMX control mode
-This function will allow you to control the lighting with a
standard DMX 512 controller.
●
Battery powered – This function will allow you to control the lighting
independently without any DMX cable
DMX Mode:
Operating through a DMX controller give the user the freedom
to create their own programs tailored to their own individual needs. This
function also allows you to use your fixtures as pattern changing lights.
1. This function will allow you to control each individual fixtures traits with a
standard DMX 512 controller.
2. The light use
6/8/10 DMX
channels to operate. Please see “DMX channel
and Functions” for the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR connections
to any standard DMX controller. Set your desired DMX address following the
setup specifications that come with your DMX controller.
3
